Sekonic RT-20PW Operating Manual

12, Sekonic RT-20PW 6 2. PocketWizard Wireless Technology ● 2-3  Setting the Radio CH/Zone Set the radio channel and zones used on Standard System. Operation 1. Select any Radio Mode in the Measuring Mode Screen. (P9 “ ”, P14 “ ”, P17 “ ”) 2. Touch the [Tool Box] Icon …

4, iii ■ Features of the RT-20PW and RT-3PW To use the Radio Triggering Mode of the L-858D after the transmitter is installed, the ash unit must be equipped with a radio function supported by a specied manufacturer, or a receiver supporting the radio function must be connecte…

14, 8 2. PocketWizard Wireless Technology ● 8. Touch [OK] Button. The setting is entered, and the display returns to the Measuring Screen. Touch the [Cancel] Button to return to the Measuring Screen without making the modication. NOTICE Set both the meter and plug-in external or built-…

19, 13 2. PocketWizard Wireless Technology ● 5. Press the Measuring Button 6 again. Check that the output power of the ash is the desired value. 6. Repeat Steps 2 to 5. Repeat the procedure for other Zones until each ash unit’s brightness is set to proper value for the eff…

30, 24 2. PocketWizard Wireless Technology ● 3) Flash Duration Analysis t Value The t value can be set in steps of 0.1 at a range of 0.1 to 0.9. The ash duration time varies depending on the input t value. 1. Touch the [Tool Box] Icon ( ) on the Measuring Screen. The Tool Box S…

35, 29 5. Radio Channel Frequencies ● 5. Radio Channel Frequencies Radio wave frequency: Regulation Radio System Channel Number Frequency RT-20PW FCC & Canada IC Standard CH1 ~ 16 344.04MHz CH17 ~ 32 346.5 ~ 354.0MHz ControlTL CH1 ~ 4 340.0 ~ 346.0MHz CH5 ~ 20 341.5 ~ 351.0MHz RT…