DFI NFII ULTRA-A Operation & User’s Manual

59, 59 3 Award BIOS Setup Utility 3.1.2.8 Typematic Rate Setting Disabled Continually holding down a key on your keyboard will cause the BIOS to report that the key is down. Enabled The BIOS will not only report that the key is down, but will first wait for a moment, and, if the key is still down,…

78, DFI NFII ULTRA-A 78 3 Award BIOS Setup Utility 3.1.7.3 +3.3V, +5V, +12V, -12V, VBAT(V) and 5VSB(V) These fields show the output voltage of the power supply. 3.1.7.4 Shutdown Temperature You can prevent the system from overheating by selecting a temperature in this field. If the system detected tha…

94, 94 4 Supported Software 4.2 Drivers, Utilities and Software Applications The CD that came with the system board contains drivers, utilities and software applications required to enhance the performance of the system board. Insert the CD into a CD-ROM drive. The autorun screen (Mainboard Utili…

45, 2 Hardware Installation 45 2.6.8 CPU Fan Connector AN37 1 The CPU must be kept cool by using a fan with heatsink. Con- nect the CPU fan to the 3-pin fan connector at location J13 of the system board. The system is capable of monitoring the speed of the CPU fan. BIOS Setting The “PC He…

109, B System Error Message 109 When the BIOS encounters an error that requires the user to correct something, either a beep code will sound or a message will be displayed in a box in the middle of the screen and the message, PRESS F1 TO CONTINUE, CTRL-ALT-ESC or DEL TO ENTER SETUP, wi…

11, 1 Introduction 11 • One floppy drive interface supports up to two 2.88MB floppy drives • Two ATX power supply connectors • One Wake-On-LAN connector • CPU, chassis and 2nd fan connectors 1.1.2 System Health Monitor Functions The system board is capable of monitoring the follow…