DFI NS30-SC/SL Operation & User’s Manual

79, 3 Award BIOS Setup Utility 79 3.1.9 Load Fail-Safe Defaults The “Load Fail-Safe Defaults” option loads the troubleshooting de- fault values permanently stored in the ROM chips. These settings are not optimal and turn off all high performance features. You should use th…

23, 2 Hardware Installation 23 Wake-On-PS/2 Keyboard/Mouse - Jumper JP1 The Wake-On-PS/2 Keyboard/Mouse function allows you to use the PS/2 keyboard or PS/2 mouse to power-on a system from the S3/ S4/S5 state. By default, JP1 is disabled. To use this function, set JP1 to 2-3 On…

96, C 96 Troubleshooting Hard Drive Hard disk failure. 1. Make sure the correct drive type for the hard disk drive has been entered in the BIOS. 2. If the system is configured with two hard drives, make sure the bootable (first) hard drive is configured as Master and t…

77, 3 Award BIOS Setup Utility 77 3.1.8 Frequency/Voltage Control The settings on the screen are for reference only. Your version may not be identical to this one. Phoenix - AwardBIOS CMOS Setup Utility Frequency/Voltage Control CPU Clock Ratio Auto Detect DIMM/PCI Clk Spread…

90, A 90 Using the Suspend to RAM Function 10. Repeat step 7 to open the Control Panel dialog box. Double- click the Power Management icon. 11. Click the Advanced tab. In the “When I press the power button on my computer” field, select “Standby”. 9. Click File System. I…

28, DFI NS30-SC/SL 2 28 Hardware Installation 2.6.2 PS/2 Mouse and PS/2 Keyboard Ports PS/2 Mouse PS/2 Keyboard The system board is equipped with an onboard PS/2 mouse (Green) and PS/2 keyboard (Purple) ports - both at location J2 of the ATX double deck por ts of the system boa…