Adaptec ANA-7711C/F Installation Manual

16, Adaptec ANA-7711C/F 2-2 ANA-7711C/F Installation Guide 5 Insert the adapter in the 3.3-V keyed PCI expansion slot. Press the board firmly into the slot until it clicks into place. Replace the slot cover screw. Caution: Be sure to use an unused 3.3-V keyed PCI slot. 6 Close the computer cabinet and rea…

8, ix Contents 1 Introduction Read This First 1-2 ANA-7711C/F NAC Adapter Features 1-2 Kit Contents 1-2 Adapter Illustrations 1-3 System Requirements 1-4 Hardware Requirements 1-4 Operating System Requirements 1-4 Using the NAC Installation CD 1-4 About the Documentation 1-5 Overview of …

22, 4-2 ANA-7711C/F Installation Guide Setting the Buffer Size The buffer size identifies the amount of system memory allocated for temporary packet storage. For example, buffer_megs=512 indicates that 512 MB has been allocated as buffer memory. Increasing this amount improves performance and provide…

20, 3-4 ANA-7711C/F Installation Guide The Configure Network Settings window is displayed. 8 Click Automatically obtain IP address settings with: or Statically set IP addresses: as appropriate. You can automatically obtain IP Address settings using dhcp. If you choose to enter static addr…

10, 1-2 ANA-7711C/F Installation Guide Read This First This chapter is an important guide to the rest of the documentation and provides a summary of the hardware and software installation process. Additional chapters describe how to: ■ Install the adapter ■ Install the driver ANA-7711C/F NAC A…