Adaptec CDP-00277-01-A Installation And User Manual

38, 8. Click Finish. maxView Storage Manager builds the logical drives. 9. Partition and format your logical drive. The logical drives you created appear as a physical disk drives on your operating system. You must partition and format these logical drives before you can use them to store data.…

3, Adaptec CDP-00277-01-A Revision History Details of ChangeIssue DateIssue Firmware/BIOS/Drivers/Utilities Version 8.0September 27, 2012 1.0 3Proprietary and Condential to PMC-Sierra, Inc. Document No.: CDP-00277-01-A Rev. A, Issue: Serial Attached SCSI RAID Controllers Installation and User's Guide …

71, C Using the Adaptec RAID Conguration Utility The Adaptec RAID Conguration (ARC) utility is a BIOS-based utility that you can use to create arrays and manage controllers, disk drives and other devices. Introduction to the ARC Utility The ARC utility comprises these tools: • Logical Device…

76, DescriptionOption When enabled, removable media devices, such as CD drives, are supported. (This setting is not available on all RAID controller models.) Removable Media Devices Boot Support When enabled, the alarm sounds. Default is enabled.Alarm Control Note: When the alarm is turned of…

73, Modifying Power Management Settings Power management settings switch the array to low power state when it is inactive for a specic time. To modify power management settings: 1. Select Manage Arrays from the Logical Device Conguration menu. 2. Select the array, then press Ctrl+W. In th…

89, K kit contents 15 L LED Indication Mode 76 Linux 39, 43 OS installation 39, 43 Linux installation 39, 41 low-prole bracket 15, 25 installing 25 low-prole computer cabinet 23 M maxCache cache settings 72 maxCache Solid State Drive 32, 57, 58 failed 57, 58 installing 32, 58 maxView Storage …