Dedicated Micros smartvu Installation Manual

16, About This page provides quick links to the pages required to fault find. System Information Opens the System Settings->System page. Software Revisions Opens the System Settings->Software page. General Information Opens the General Information page (refer to ‘General Information�…

6, Dedicated Micros smartvu Internal Dome Surface Mount Installation Refer to the Templates and quick guide for more information. 1 To remove the dome cover, press the release tab, lift slightly to clear the catch and rotate it counter- clockwise and gently pull it away from the camera body. The inner liner can now be remov…

43, For more information about Dedicated Micros' products or for details of your local Dedicated Micros office, please visit: www.dedicatedmicros.com/contact …

27, Maintain The page allows for the unit to be reset or changed back to the default settings as supplied from the factory. …

34, Live Trans The unit transmits live images using JPEG or MPEG formats. The NetVu Connected remote viewing software will use the settings configured on this page as the defaults for JPEG & MPEG; High, Medium and Low settings. High LAN/Medium WAN/Low VLBR This shows the transmi…

12, Attributes This menu shows the general information about the unit including the version of software installed, the unit’s serial number and the allocated DHCP IP address. The system will display a warning if user accounts have not been set up. These can be eliminated by setting up ac…