ADS Technologies API-814 Installation Manual

13, Brancher le câble d’alimentation sur le disque dur ou le CD-ROM que vous installez. ETAPE 6: Avec les vis fournies, mettre en place le disque dur ou le CD-ROM. Pour un disque dur, ceci se fait par le dessous du module du Drive Kit. Pour les CD-ROMs, ceci se fait (avec l’avant du modul…

5, STEP 5: Connect the at ribbon cable to the drive. NOTE: The red line on the ribbon must be facing toward the power connector of the drive and for the end connected to the drive kit, the red line must be on the side closest to the outside casing of the drive kit. STEP 6: With the provi…

19, Service and Warranty Service: If you require assistance with the installation, operation, or application of your ADS Technologies, Inc. product there are several options available to you as described in the technical support section of this manual. The ADS Technologies technical support and cust…

10, • Click on “DISK DRIVES” • Double click on the drive that you just plugged in (for example: if you plugged in a MAXTOR, you should click on the MAXTOR) • Click on the “SETTINGS” tab 8 Drive Kit Installation Manual Drive Kit Installation Manual …

8, Turn the Drive Kit on: Once the software has been properly installed, turn on your drive kit (switch on the back), plug one end of the USB 2.0 or 1394 cable into the Drive case. With the computer already turned on, plug the remaining end of the cable into your computer’s available FireWire or …

20, ADS Technologies API-814 ADS Tech Technical Support 562.926.4338 North America Support Hours: M-F : 7 am - 6 pm, PST Email : [email protected] website : www.adstech.com European Technical Support: +353.61.702042 If you have any problems or questions on this product, please call : Drive Kit Installation M…