Blizzard Lighting G70 Operation & User’s Manual

3, Page 3 G70™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC 1. GETTING STARTED What’s In The Box? • 1 x G70™ Moving Head Spot • An Ever-So-Handy Power Cord • A Sweet Safety Cable & set of Mounting Brackets • One really classy DMX cable • This…

17, Blizzard Lighting G70 Page 17 G70™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC 5. APPENDIX A Quick Lesson On DMX DMX (aka DMX-512) was created in 1986 by the United States Institute for Theatre Technology (USITT) as a standardized method for connecting lighting consoles to lighting dimmer modules…

9, Page 9 G70™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC Fixture Linking (Master/Slave Mode) 1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the rst xture. 2. Connect the end of the cable coming from the rst �…

6, Page 6 G70™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC Figure 1: The G70™ Pin-Up Picture Lens Menu Buttons LCD Readout Figure 2: The Rear Connections DMX OutPower Switch Power In Power Out Head/Arms Carry Handle DMX InFuse Cover …

8, Page 8 G70™ Moving Head Spot - Rev. A (c) 2014 Blizzard Lighting, LLC Cable Connectors Cables must have a male XLR connector on one end and a female XLR connector on the other end. (Duh!) CAUTION: Do not allow contact between the common and the x- ture’s chassis ground. Groun…