Allied GB1380 Operation & User’s Manual

17, GB1380 User Manual 70-0042A-A AVT Inc. 15 Camera Installation Computer Interface The Prosilica GB Series cameras will work with any Ethernet network card; however Prosilica strongly recommends using Gigabit Ethernet components that support Jumbo Frames. A Jumbo Frame is loose…

6, GB1380 User Manual 70-0042A-A AVT Inc. 4 Mechanical 45.21.78 19.10.7569.92.75 16.50.65 0.65 16.5 1.66 42.2 0.62 15.70.37 9.4 0.93 23.6 1.16 29.5 0.19 4.8 0.37 9.4 2 PLCS TYP M2.5x0.45 0.63 15.9 0.54 13.6 0.062 1.6 0.21 5.2 INCHES[MILLIMETERS] ITEM 1: 3M 10214-55G3PC ITEM 2…

32, GB1380 User Manual 70-0042A-A AVT Inc. 30 Triggering during the Readout State o For applications requiring the fastest triggering cycle time whereby the camera image sensor is exposing and reading out simultaneously, then the User Trigger signal should be applied as soon as a val…

14, Allied GB1380 GB1380 User Manual 70-0042A-A AVT Inc. 12 not isolated and therefore careful attention should be used when designing cabling in noisy environments. Isolated Ground Isolated Ground must be connected to the user’s external circuit ground if Sync Input 1 or Sync Outp…

12, GB1380 User Manual 70-0042A-A AVT Inc. 10 Item 1: GIGABIT ETHERNET PORT This port conforms to the IEEE 802.3 1000BASE-T standard for Gigabit Ethernet over copper. It is recommended that CAT5E or CAT6 compatible cabling and connectors be used for best performance. Ca…

20, GB1380 User Manual 70-0042A-A AVT Inc. 18 Figure 6. Turn off Firewall. o Return to the Gige Local Properties window as in Figure 4. Select the Advanced tab as in Figure 6 and disable the Firewall for this device. Click OK to save changes. Gigabit Ethernet Cabling Al…