Acard ARS-2018 Operation & User’s Manual

10, 10 ARS-2018/2018E Manual 2.1 Install HDD into ARS-2018 Follow the steps below to install the hard drives into the trays of ARS-2018. (1). Unlock. (2). Open the tray by pushing the fastener to the left. (3). Pull the handle to slide the (4). Put a hard drive into the tray, and a…

22, 22 ARS-2018/2018E Manual 1. SYSTEM INFORMATION : the information of the system 1.1 RAID information : the informaiton of RAID subsystem Display the RAID subsystem’s vendor, model name, firmware version, SCSI speed, RAID mode, RAID capacity. 1.2 Disk 1 info : the information of the …

30, 30 ARS-2018/2018E Manual Figure 4-5 Step 5. Add a new partition for the hard drive of Mirror Smart in the “Disk Manage- ment” so as to access the new hard drive. Step 4. In “Device Manager” double click “Disk drives” to confirm if the system has detected the disk of Mirror Sma…

3, Acard ARS-2018 Table of Contents Chapter 1 Introduction....................................... 4 1.1 Overview ................................................................ 4 1.2 Features ................................................................ 4 1.3 Specifications........................…

38, 38 ARS-2018/2018E Manual If you want to change the RAID mode, you can click “Setup” and select “Change RAID mode” as shown below. 1. 2. 1. Select the RAID mode. 2. Select a hard drive as the primary disk. …

18, 18 ARS-2018/2018E Manual Once installing successfully, you can find ARS-2018/2018E as Mirror Smart 2018 in “Device Manager” under “My Computer”. (3). Connect the power cords to each set, and attach a terminator to the last set. 12 …