909 H144L1 Instruction Manual

13, 13 Avoid charging or storing your battery in temperatures below 0ºC and above 40ºC. Using the drill Trigger switch This trigger switch is an electronic variable speed control which enables the user to vary the speed continuously. The speed varies according to how far the …

4, 4 General safety rules WARNING. Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings …

11, 11 Important information – product care This drill/driver uses Lithium-Ion battery cells. Care MUST be taken to ensure both the safety and life of the battery pack is maintained. Ensure you have read all of the safety notes in the previous pages before using the pneumatic hammer drill/…

8, 8 Additional safety instructions related to the battery pack and battery safety • Use only the 909 batteries supplied with the 909 tool or 909-approved replacements. • Do not use the battery to power any device other than the 909 tool it was sold with. • Charge the battery only…

10, 10 Know your product This drill is specifically designed for hammer drilling into concrete or similar type material. Addition features also allow the drill to be used for drilling timber or metal plus small screwdriving tasks. Use the tool and accessories for intended applications…

6, 909 H144L1 6 • Do not put pressure on the drill, such that it slows the motor down. Allow the drill bit to cut without pressure. You will get better results and you will be taking better care of your tool. • Keep the area free of tripping hazards. • Do not let anyone under 18 years operate…