Motocaddy M1 PRO Instruction Manual

21, Page 19 Adjusting the Front Wheel Alignment Adjusting the front wheel alignment if your trolley is veering In the event that your trolley is not tracking in a straight line, the alignment of the front wheel can be adjusted to rectify the fault. This problem can be caused by a number of…

15, Page 13 Using your M1 PRO The M1 PRO is extremely simple to control. There is one main button that is used to turn the trolley on and off, whilst also controlling the speed of the trolley. The speed can be adjusted while the trolley is stationary or in motion. The trolley has 9 speed setting…

13, Page 11 • Submerging the trolley in water (eg a lake) is likely to cause damage to the trolley. • Do not operate the trolley whilst under the inuence of drugs or excessive amounts of alcohol. • All batteries must be disconnected from the trolley before transporting. • Le…

8, Page 6 Getting Started - Unfolding your Trolley Unfolding your Trolley 1. Place trolley in upright position (Fig. 1) 2. Release CLIP 1 (Fig. 2) and push front wheel away from trolley until it is fully extended and trolley is at 3. Ensure CLIP 1 clicks into place to lock front wheel i…

12, Motocaddy M1 PRO Page 10 Safety Cut-out Your M1 PRO is tted with a safety cut out feature which will help prevent damage to your trolley in the event of it being inadvertently switched on and in a position where it is not able to move for 30 seconds. If this should occur, the trolley will aut…