AGFA 1200 Owner's Manual

26, Chapter 2: Installing the Scanner 26 If your PC has a 25-pin connector and your Arcus 1200 is the only external SCSI device to be connected to your PC: " Note: If your configuration also consists of internal SCSI devices and if your SCSI controller does not disable termination auto…

17, Chapter 2: Installing the Scanner 17 Which SCSI Interface Card Arcus 1200 requires a SCSI interface to work with your Macintosh. If your Macintosh does not have a SCSI interface card or built-in interface, contact your dealer. Adaptec™ products are recommended to use together with y…

11, AGFA 1200 Chapter 1: Preparing the Scanner 11 Working with Trays and a Flexible Template Trays A locking system is installed for safety reasons, to protect the scanner's optical assembly and its electronic components from possible damage and dust. Two trays are delivered with your sc…

19, Chapter 2: Installing the Scanner 19 If your Arcus 1200 is the only external SCSI device to be connected to your Apple Macintosh: 1 Place the terminator on the 50-pin connector of the scanner. 2 Snap the diamond shaped wire clips into the clip brackets to secure the connection. 3 Conne…

39, Chapter 3: Placing Originals 39 2 Put the batch slide holder with the originals in the batch slide holder frame with the Agfa logo at the top. 3 Insert the batch slide holder frame in the scanner. " Note: Before you put the batch slide holder frame in your scanner, close the TPU and r…