SGM X-5 Manual 

15, 15 DMX Protocols 1 channel mode Channel Value Percent Function 1 0-5 0-1 Blackout 6-249 2-97 )lash rate, slow to fast 250-255 98-100 Continuous blinder effect 3 channel mode Channel Value Percent Function 1 0-5 0-1 Blackout 6-255 2-100 )lash intensity - minimum to ma[imum 2 0-255 0-100 )lash du…

11, 11 Setting DMX address In the root menu the user can set the DMX start address directly by using the arrow UP and DOWN (Fig. 3). The ¿[ture has a handy feature which displays the DMX start address for the ne[t ¿[ture (assuming you are con- necting more than one ¿[ture) The selected star…

23, 23 CONSTRUCTION Housing…………………………………………………………….................................................Aluminium )inish…………………………………………...................................................................Electrost…

12, 12 DMX Control Summary )or speci¿c command values, see “DMX protocols” on page 15. Intensity )lash intensity can be set from minimum (blackout) to ma[imum in all DMX modes e[cept 1 channel mode (where it is always at ma[imum intensity). A special pi[el mode enables the ¿[ture to be used as a …

9, SGM X-5 9 Controller Operation This section describes how to operate the X-5/XC-5 with a DMX controller. Data Connection The X-5/XC-5 provided 5-pin XLR connectors for data connection. The pin-out on all connectors is pin 1 to shield, pin 2 to cold (-), and pin 3 to hot (+). There is no connection…