Hirschmann RS20 Reference Manual

198, Hirschmann RS20 CLI Commands: Security 198 6.1 Security Commands CLI L2B Release 4.0 11/07 6.1.2 users login This command assigns the specified authentication login list to the specified user for system login. The <user> must be a configured <user> and the <listname> must be a configu…

5, Content CLI L2B Release 4.0 11/07 5 4.3.23 snmp-server contact 82 4.3.24 snmp-server location 83 4.3.25 snmp-server sysname 83 4.3.26 snmp-server enable traps 84 4.3.27 snmp-server enable traps chassis 85 4.3.28 snmp-server enable traps l2redundancy 86 4.3.29 snmp-server enable traps link…

35, CLI Commands: Base CLI L2B Release 4.0 11/07 35 4 CLI Commands: Base This chapter provides detailed explanation of the Switching commands. The commands are divided into five functional groups: D Show commands display switch settings, statistics, and other information. D Configuratio…

60, CLI Commands: Base 60 4.2 Class of Service (CoS) Commands CLI L2B Release 4.0 11/07 4.2.4 show classofservice dot1p-mapping This command displays the current 802.1p priority mapping to internal traffic classes for a specific interface. The slot/port parameter is required on platforms that …

104, 104 4.5 Device Configuration Commands CLI L2B Release 4.0 11/07 4.5.7 set igmp This command enables IGMP Snooping on the system. The default value is disable. Note: The IGMP snooping application supports the following: D Global configuration or per interface configuration. D Validatio…

36, CLI Commands: Base 36 4.1 System Information and Statistics Com- CLI L2B Release 4.0 11/07 4.1 System Information and Statistics Commands 4.1.1 show arp switch This command displays the Address Resolution Protocol cache of the switch. Format show arp switch Mode Privileged EXEC an…