Master cook SRCG2803 Assembly Instructions & User Manual

11, Master cook SRCG2803 Assembly Instructions Attach firebox lid stop (17) to firebox top (18) with 1pc M5 x 12 bolt (DD) and 1pc M5 nut (EE). Step 9 Step 9 Attach the side handle (16) to the smoking chamber (2) with 2pcs M6 x 12 bolts (AA) and 2pcs M6 nuts (BB). Step 8 Step 8 AA 17 DD 18 EE 2 BB 16 AA M6 x 12…

4, Safety Warnings • Check grease level in grease cup often and empty or change when 3/4 full. Use extreme caution as the smoker, grease cup and its contents will be hot. • When grilling, grease from meat may drip into the charcoal and cause a grease fire. If this should happe…

3, Safety Warnings IMPORTANT SAFETY WARNINGS WE WANT YOU TO ASSEMBLE AND USE YOUR GRILL AS SAFELY AS POSSIBLE. THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT YOUR ATTENTION TO POSSIBLE HAZARDS WHEN YOU SEE THE SAFETY ALERT SYMBOL, PAY CLOSE ATTENTION TO THE INFORMATION WHICH FOLLOWS! B…

9, Assembly Instructions Insert the wheel axle (6) through the two holes of short legs (4). Attach two wheels (8) to wheel axle (6) with 2pcs M8 locking nuts (CC). Turn the cooking chamber assembly into horizontal position for later steps. Step 5 CC M8 Nut Hardware Used 2pcs Step 5…

22, Operating Instructions Smoke Cooking Tips IF USING LIGHTER FLUID, PROCEED TO STEP 7 Step 5 Open the firebox air vent approximately half way and smoke stack damper 2.5cm to 5cm. With firebox lid and smoking chamber door open, stand back and carefully light charcoal and allow to burn until…

7, Hardware Hardware # Description M6 x 12 Bolt M6 Nut M8 Locking Nut M5 x 12 Bolt M5 Nut M5 Stepped Bolt M6 Stepped Bolt 47 33 2 1 3 1 1 AA Picture Qty BB CC DD EE FF GG Tools Required Phillips Head Screwdriver (Not included) Adjustable Wrench (Not included) 6 …