astra telematics AT110V5 Operation & User’s Manual

5, astra telematics AT110V5 Hardware Description Dimensions SIM installation Note: fitting the SIM will trigger the AT110 to power up. The AT110 must be fitted with a SIM card (micro SIM, format 3FF) to allow access to a GSM/GPRS/UMTS network services. Th…

10, AT110-STD (Standard) Kit Contents Our AT110 standard kit is supplied with a CB110 power / ignition cable and an AE001 combined GSM-GPS antenna. CB110 Power / Ignition Cable This 3-way fused cable is used to connect a permanent voltage source (i.e. power), ground and an ignition-switched …

8, Digital Inputs Digital inputs 1 to 4 are normally low and can be connected directly to 12/24V vehicle circuits. Digital inputs 5 and 6 are normally high, for use in pull-down applications. Simply switch to GND to activate these inputs. Note: damage may be caused to the AT110 devi…

9, Electrical Parameters Operating Conditions Parameter Min Max Units Power Supply Input Voltage +7 +36 V Digital Input High Voltage Threshold +5.0 - V Digital Input Low Voltage Threshold - +2.0 V Digital Maximum Voltage…

4, Technical Specifications 1 UMTS/HSPA Communications: 800/850/900/1900/2100 MHz GSM/GPRS Communications: 850/900/1800/1900 MHz GSM Antenna: external GPS Antenna: external GPS Receiver: EVA-M8M L1 receiver: 72 channels Position …