Midtronics MDX-650 MILITARY Instruction Manual

1, INSTRUCTION MANUAL MDX-650 MILITARY Battery Conductance and Electrical System Analyzer For 6 & 12-volt automotive starting batteries and 12 & 24-volt starting/charging systems …

4, MDX-650 MILITARY Options Menu Procedure 1. Press to access the Options Menu. 2. Use p or q to move to the line you want to edit. 3. Press to make the highlighted line editable. 4. Use p or q to select the character for that cursor location. 5. Press to move to the next location. 6. Pres…

5, Midtronics MDX-650 MILITARY MDX-650 MILITARY Preparations Before the Test Before connecting the tester, clean the battery posts or side terminals with a wire brush and a mixture of baking soda and water. When testing side- post batteries, install and tighten lead terminal adapters. A set of adapters is included w…

6, MDX-650 MILITARY Battery & System Test When you rst connect the tester to the battery, it functions as a voltmeter until you press to start the test. This function can be turned o through the Options Menu. After you press , scroll to each parameter using p or q and press to sele…

8, MDX-650 MILITARY Starter System Test IMPORTANT: Before starting the test, inspect the alternator drive belt. A belt that is glazed or worn, or lacks the proper tension, will prevent the engine from achieving the rpm levels needed for the test. Once you have completed an in-vehicle…

9, MDX-650 MILITARY Charging System Test Once you have completed an in-vehicle test, the display alternates between the battery test results and the message PRESS FOR CHARGING TEST. Press to proceed with the charging test. Following the on-screen prompts: 1. Rev the engine. 2. Turn on high…