Black Widow Security BW 3750 Installation Manual

6, 6 • GRAY WIRE - Auxiliary 1 output (+/–) 15A relay. Connect to an optional feature such as trunk release,etc. • WHITE WIRE - Parking Light output (+/-) 10A relay. Connect to the vehicle’s parking light wire.If the vehicle’s parking light circuit exceeds 10 amps a relay is r…

7, 7 4-Pin White Connector A: Plug-in connector port for dual stage shock sensor. 4-Pin White Connector B:Plug-in connector port for optional dual stage radar sensor. Adding Transmitters To add a new transmitter to the system have the desired transmitters ready and follow the Code Learning…

2, 2 PASSIVE ARMING The passive arming feature allows the system to automatically arm after closing all doors. The Passive Arming feature requires the ignition to have been on for at least 10 seconds prior to exiting the vehicle. This enables the key to be turned on then off quickly to avoid p…

1, Black Widow Security BW 3750 1 Standard Features: Two 5-Button Remote Transmitters Status indicator (LED) Valet / override switch Multi-tone siren Dual stage impact sensor Remote panic Remote chirp mute Remote sensor bypass Passive or active arming Optional Features: Flashing parking lights Starter disable Keyless entry Remo…

5, 5 Before you begin the installation • Read the INSTRUCTIONS! • Always use a multi-meter when verifying vehicle wiring. • Before mounting the product, verify with the customer the desired location for the valet switch and LED. • Protect the vehicle by using fender covers. • A…