Seiko DPU-414 Operation & User’s Manual

23, Seiko DPU-414 - 19 - (3) Software DIP SW3 Switch No. Function ON OFF 1 Data bit length Eight bits Seven bits 2 Parity permission Without With 3 Parity condition Odd Even 4 Flow control H/W BUSY XON/XOFF 5 to 8 Baud rate See the table below Switch No. Baud rate 5 6 7 …

36, - 32 - 5 CHARACTER CODE TABLE z Japanese Character Set The following table is the Japanese character set when 0 is set to normal 0. • SP denotes space. • Blank codes are ignored. • Function codes are enclosed in thick…

12,  - 8 - 1 PREPARATION  1.1 Unpacking  Once you have opened the carton, make sure it contains the printer and all accessories. The standard configuration contains the following 3 items:         The option configuration contains the following items: …

47, - 43 - 8 CARING FOR THE DPU-414 PRINTER If the outside of your printer gets dirty, wipe it with a soft, dry cloth. If it gets very dirty, wet a soft cloth with mild detergent diluted with water, squeeze it well, and clean the printer.  DO NOT use thinner, benzine, or oth…

4, Federal Communications Commission (FCC) compliance statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference…

22, - 18 - (2) Software DIP SW2 Switch No. Function ON OFF 1 Print mode Normal printing (40 columns) Condensed printing (80 columns) 2 User-defined characters back-up ON OFF 3 Chatacter type Ordinary characters Special characters 4 Zero font 0 0 5 to 8 International cha…