Hand Held Products 4X00 Operation & User’s Manual

19, IMAGETEAM™ 4X00 Series Hardware Interface Layer Specification 13 WaitMillisecondsICMedia This function waits the number of milliseconds indicated before returning. void WaitMillisecondsICMedia( DWORD nTime ) Passed Arguments Description NTime The number of milliseconds to delay. Returns None. Wr…

8, 2 IMAGETEAM™ 4X00 Series Hardware Interface Layer Specification Alphabetic Function List The following is a list of functions that the ImagerHardware DLL must export to support the imaging device driver. The functions described below are specific to the IC Media imager and the…

3, Laser Eye Safety Statement for IT4300 Series Engines The IT4300 is intended for use in CDRH/IEC Class 2 devices. Note: It is the OEM manufacturer’s responsibility to comply with applicable regulation(s) in regard to standards for specific equipment combinations. Caution: Use of controls or adjus…

13, IMAGETEAM™ 4X00 Series Hardware Interface Layer Specification 7 GetRegisterSettingsForHHPExposureControlICMedia This function is used for the hardware DLL to give the driver access to the register settings needed for its hardware platform. The structure below represents the array dat…

7, Hand Held Products 4X00 IMAGETEAM™ 4X00 Series Hardware Interface Layer Specification 1 Introduction and Overview This document is an overview of the structure of the IT4X00 Series OEM imaging software provided by Hand Held Products. Detailed information that describes the Hand Held Products OEM Application Prog…