Standard Horizon CP1000C Manual, Addendum

7, ADDENDUM Page 9 To activate this function follow the procedure: 1. Press [MENU]. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENTER] or move the ShuttlePoint knob to the right. 2. Move the ShuttlePoint knob to highlight FONTS & SYMBOLS and press [ENTER] or m…

9, ADDENDUM Page 11 Data Off Red when at least one of the following objects or layers is turned off (by the user): Depths/soundings; Wrecks/obstructions; Tracks/routes; Attention areas; Nav-Aids. Declutter Displays red when clearing overlapping objects. Dangers Red when “Guardian Tech…

10, Page 12 ADDENDUM 4. Move the ShuttlePoint knob up or down to select the preset and press [ENTER]. 5. Press [CLEAR] or move the ShuttlePoint knob to the right until the Chart page is shown. Setting Full Medium Low RADAR Tides Custom (Default values) Names On On On On On On Buoy…

5, ADDENDUM Page 7 CAUTION Do not remove the C-Map MAX software update card until step 7 is completed. NOTE The screen will be blank for about 40 seconds then a Internal WWB chart upload status screen will be shown. On this screen you will notice the GPS chartplotter will erase t…

14, Page 16 ADDENDUM Figure 4.0.0b - Example of Full Info on MULTIMEDIA object On the Full Info, there will be the small camera icon on a corner of the square containing the object icon. To see the picture press [MENU] when the object with a picture is highlighted. When the picture is shown, it is p…

11, Standard Horizon CP1000C ADDENDUM Page 13 3.1.2 Depth Settings To control the display on the map of the depth informations. Depth Range : Turns the displaying of the Depth Sounding, Bathymetric Lines and Depth Area (the sea areas included in the user selectable range of minimum and maximum depth limits). Depth Range Mi…