Janome CompuLock Manual, Instruction Book

12, 10 Threading the Machine 1 2 3 45 6 7 1 Thread guide 2 Double chain looper thread 3 Lower looper thread 4 Upper looper thread 5 Right needle thread 6 Left needle thread *The machine has been threaded with 4 threads (Overlock 4) at the factory for popular sewing. 7 Threading chart Saf…

32, 30 (To Memorize Settings) 1 After entering your fabric, thread and layers settings, press the MEM key to save them. 2 There are three memory locations. Choose MEM 1, MEM 2 or MEM 3. (The number of memory locations changes depending on the type of stitch.) 3 The formerly me…

2, IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following. Read all instructions before using this sewing machine. DANGER – To reduce the risk of electric shock: 1. An appliance should never be left…

11, 9 * Please use a size 11 or 14 needle. * There are 4 holes for inserting needles, depending on the desired stitch selection. Make sure all 4 screws are tightened even if no needle is inserted in the clamp. 1 Needle 2 Flat side 3 Needle clamp screw (4 screws) 4 Screwdriver 5 RB (…

39, 37 Securing Ends To avoid unravelling, it is necessary to leave a thread chain about 5 cm (2”) long at the beginning and the end of the seam. To secure the beginning and end of a seam choose one of the following methods: At the Beginning A. Separate the end of the threa…

53, Janome CompuLock 51 How to Replace the Extension Table The visual touch screen will indicate when you should replace the extension table. Open the looper cover and pull off the extension table (A). Snap the extension table (B) onto the looper cover . 1 Extension table (A) 2 Looper cover …