Lexmark 231 Operation & User’s Manual

127, Menu item Description Overlay Off Confidential Copy Draft Urgent Custom Specifies overlay text that is printed on each page of the copy job Note: Off is the factory default setting. Allow priority copies On Off Allows interruption of a print job to copy a page or document Note: On is the f…

201, If the problem continues, the printer may need to be serviced. For more information, contact Customer Support. Characters have jagged or uneven edges These are possible solutions. Try one or more of the following: CHECK THE PRINT QUALITY SETTINGS • Change the Print Resolution setting in t…

80, 6 Press 1 to enter another shortcut, or press 2 to end the shortcut entry. 7 Press . Sending an e-mail using the address book 1 Load an original document faceup, short edge first into the ADF or facedown on the scanner glass. Note: Do not load postcards, photos, small items, transparencies, photo …

117, Menu item Description NPA Mode Off Auto Sets the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol Notes: • Auto is the factory default setting • Changing this setting from the printer control …

69, Lexmark 231 5 From the printer control panel, press . 6 Press to return to Ready. Copying using the scanner glass 1 Place an original document facedown on the scanner glass in the upper left corner. 2 From the printer control panel, press the Copy button, or use the keypad to enter the number of copies. 3 Ch…

192, TEXT IS LIGHT OR DISAPPEARING From the printer control panel, press the Content button until the light comes on next to Text or Text/Photo. THE OUTPUT APPEARS WASHED OUT OR OVEREXPOSED • From the printer control panel, press the Content button until the light comes on next to Text/Photo or Ph…