Lexmark 6500e Installation And Configuration Manual

19, 4 Under Default Scan Settings, select Use Global Default Scan Settings if you want to use the previously-defined default scan settings for this share, or adjust the individual settings as needed. For information about the settings, see “Default Scan Settings” on page 17. 5 Click A…

36, Copyright (c) 2002 Olaf Kirch Copyright (c) 2003 Kevin Stefanik Redistribution and use in source an binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list…

12, 3 Type the Server Port that will be used for address book lookups. The most commonly-used values are: Non-SSL connections—Port 389 (the default setting on the printer) SSL connections—Port 636 Non-SSL Global Catalog—Port 3268 SSL Global Catalog—Port 3269 4 Select whether or not LD…

4, Notices................................................................................................33 Index...................................................................................................37 Contents 4 …

9, Date and time In order for users to login to the printer, the printer clock must be set to within five minutes of the domain controller system clock. Printer clock settings can be updated manually, or configured to use Network Time Protocol (NTP), to automatically sync with a trusted clock—typic…

17, Lexmark 6500e 5 From Scan to Network Authorization, select which Access Control should be used to authorize user groups. If groups are not being used, select the same setting used for Device Access Control in PKI Authentication (usually Solution-specific access control 1). Note: Authorization c…