Lexmark C925 Maintenance Manual

3, Maintaining the printer Cleaning the exterior of the printer 1 Make sure that the printer is turned off and unplugged from the wall outlet. CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the wall outlet and …

8, Ordering imaging units When 84.xx [Color] imaging unit low, or 84.xx [Color] imaging unit nearly low appears, order a replacement imaging unit. When 84.xx Replace [color] imaging unit and [color] cartridge appears, replace the specified imaging unit and toner cartridge. Recommended im…

2, Contents Maintaining the printer................................................................................3 Cleaning the exterior of the printer..........................................................................................................3 Cleaning the printhead lenses.............…

11, 9 Peel off the toner sealing tape. 10 Insert the toner cartridge and turn the lock lever to the left. 11 Close the front door. Replacing a toner cartridge 1 Open the front door. Warning—Potential Damage: To avoid overexposing the imaging units, do not leave the door open for more than 10 minutes. …

4, 3 Remove the imaging unit: a Open the internal cover. b Push the imaging unit lock lever up and pull out the imaging unit. 4 Locate the LED wipe at the end of the imaging unit. Make sure it is in the correct position. Maintaining the printer 4 …

14, Lexmark C925 5 Unpack the new waste toner bottle. 6 Insert the new waste toner bottle into the printer. 7 Using both hands, push the sides of the internal cover firmly until it clicks into place. 8 Close the front door. 9 From the printer control panel, reset the Waste Toner Bottle counter in the…