Lexmark MX310 Series Operation & User’s Manual

254, Polski Niniejszym Lexmark International, Inc. oświadcza, że niniejszy produkt jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC. Português A Lexmark International Inc. declara que este este produto está conforme com os requisi…

132, Lexmark MX310 Series Use To Resolution 75 dpi 150 dpi 200 dpi 300 dpi 400 dpi 600 dpi Specify the resolution of the scan in dots per inch. Note: 150 dpi is the factory default setting. Darkness 1–9 Lighten or darken the output. Note: 5 is the factory default setting. Orientation Portrait Landscape Specify the orie…

97, Notes: • Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass. • The ADF indicator light turns on when the paper is loaded properly. b If you are loading a document into th…

214, Print is too dark Action Yes No Step 1 a From the Quality menu on the printer control panel, reduce the toner darkness. Note: 8 is the factory default setting. b Resend the print job. Is the print still too dark? Go to step 2. The problem is solved. Step 2 a From the printer control panel, se…

136, Use To Sides (Duplex) Off Long Edge Short Edge Specify the page orientation of text and graphics. Notes: • Off is the factory default setting. • Long Edge sets binding along the long edge of the page (left edge for portrait and top edge for landscape). • Short Edge sets binding along the …

222, Action Yes No Step 3 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. Do streaked vertical lines appear on prints? Go to step 4. The problem is solved. Step 4 a Reinstall the im…