MINOLTA-QMS PagePro 4110W Quick Start Manual

7, 5 2. Remove the Network Card from its anti-static bag. Make a note of the Net- work Card’s serial number (S/N) and MAC address (LAN ADDR). S/N: XXXXXX LAN ADDR: XXXXXXXXXXXX MAC address Serial number Step 1 …

13, 11 5. This displays the TCP/IP Configuration page for changing the configuration of TCP/IP parameters. For full details on each parameter, see 8-3-1 TCP/IP Configuration in the Net- work Interface Card User’s Manual on the CD-ROM that comes with your printer. 6. After setting TCP/IP parame…

15, 13 7. Wait for about five minutes until the Network Card resets automatically. The printer prints a Network Card’s status page after reset is complete. 8. Display the MS-DOS prompt and type the following: ping <Network Card IP address> Repeat the above step until a response st…

19, 17 4. This displays a Print Server Settings screen. Use this screen to configure NetWare printers, print queues, and print servers, and to configure the Net- work Card so the printer can log in on the NetWare network. For full details on each parameter, see 7-4 NWSetup (Windows) in the N…

14, 12 Using BOOTP Lite to Make TCP/IP Settings (Windows 95/98/Me/2000/NT 4.0) BOOTP Lite lets you make Network Card TCP/IP settings over a network from a computer that has TCP/IP installed. Note 1. From the Bootp folder (in the ExtraSW folder) on the CD-ROM that comes with your p…

3, MINOLTA-QMS PagePro 4110W 1 Program License Agreement Notice to the User Please carefully read the License Agreement before using or copying the software package in this documentation set. The right to use this software product is conditional on your agreement on the following terms. Copying and using this sof…