MINOURA M60-D Instruction Manual

5, 4. Place your rear wheel in between the couplings. 1) Loosen the lock ring (UF-18) to allow the left side coupling (UF-8) be free. (see Fig. C) 2) Pull up the quick hub clamp lever (UF-17) to retract the right side coupling. (see Fig. D) 3) Insert the left side (quick lever side) skew…

3, BF-2: M60 Main Frame (Blue) EM-1: Outer Cap BF-5: Leg Rubber Cover (White) EM-2: Axle Holder BF-6: Leg Rubber EM-3: Drive Roller & Bearing UF-7: Clamp Lever Guide EM-4: Main Housing UF-8: Left Side Coupling (for Q/R skewer) EM-5: Alloy Rotor UF-17…

2, MINOURA M60-D IMPORTANT NOTICE • For use with a normal 2-wheel bicycle only. Do not use a tandem, recumbent, or other. • Hub nut type rear wheel axle is not compatible with M60-D in standard. You need to replace the left side coupling (UF-8) with optional "Left Side Coupling for Hub Nut …

4, 3. Fully open both legs and place M60-D on a at and level oor. (see Fig. B) At this moment, make sure all 4 foot are contacting the oor at once to sit on the oor stable. How To Setup Your M60-D Trainer 2. Install the Mag unit and the Roller Pressure Adjust Knob set (MF-3) t…

1, Indoor Bicycle Trainer – instructions manual Minoura Japan Headquarters Minoura North American Tech Center (for all customers) (for U.S. residents only) 1197-1 Godo, Anpachi, Gifu 503-2305 Japan 1996 East Avenue, Hayward, CA 94541 U.S.A. Phone: +81-584-27-313…