Dalsa Spyder3 SG-14 Operation & User’s Manual

2, 2 Spyder3 GigE Vision SG-14 Monochrome Cameras User’s Manual 03-032-20123-01 Teledyne DALSA © 2013 Teledyne DALSA Inc. All information provided in this manual is believed to be accurate and reliable. No responsibility is assumed by Teledyne DALSA for its use. Teledyne D…

36, 36 Spyder3 GigE Vision SG-14 Monochrome Cameras User’s Manual 03-032-20123-01 Teledyne DALSA Exposure Modes in Detail Mode A. Internally Programmable Line Rate and Exposure Time (Factory Setting): ExposureMode Timed and LineTriggerMode Off (Internal) Operates at a maximum l…

51, Spyder3 GigE Vision SG-14 Monochrome Cameras User’s Manual 51 Teledyne DALSA 03-032-20123-01 The brightest pixel should be slightly below the target output. When 6.25% of pixels from a single row within the region of interest are clipped, flat field correction results may be …

40, 40 Spyder3 GigE Vision SG-14 Monochrome Cameras User’s Manual 03-032-20123-01 Teledyne DALSA If rotary encoder is used, Line0 -- Phase A , Line2 -- Phase B Line Format This feature returns or sets (if possible) the current electrical format of the selected physical input Line:…

88, 88 Spyder3 GigE Vision SG-14 Monochrome Cameras User’s Manual 03-032-20123-01 Teledyne DALSA Signal Label Description EXSYNC Q4 EXSYNC PRIN Q5 PRIN DIRECTION Q6 Camera forward and reverse control. CAM_CTRL (NOT USED_ Q7 CC4 signal. Not us…

37, Dalsa Spyder3 SG-14 Spyder3 GigE Vision SG-14 Monochrome Cameras User’s Manual 37 Teledyne DALSA 03-032-20123-01 Mode D. External Line Rate and Internally Programmable Exposure Time: ExposureMode Timed and LineTriggerMode On (External) Figure 21: EXSYNC controls Line Period with Internally controlled E…