Coherent LaserCam-HR-UV Operation & User’s Manual

11, Coherent LaserCam-HR-UV Safety 1 SAFETY Carefully review the following safety information to avoid personal injury and to prevent damage to this instrument or any sensor connected to it. This equipment contains no user-serviceable parts. For service informa- tion, refer to “Obtaining Service” on page 28…

29, Operation 19 OPERATION This section discusses the following topics: • Pixel spacing (page 20) • Power on (page 20) • Warm-up time (page 20) • Maximum power levels (page 21) • Saturation (page 21) • Low Distortion Faceplate (LDFP) (page 21) • Dust/dirt (page 22) • Clean…

20, LaserCam-HR-UV User Manual 10 A shortcut to BeamView-USB will automatically be placed on the desktop. Do not click it at this time. Continue with the installation. Click the "Thanks" button to complete the BeamView-USB installation. [ Read the License Agreement and then click th…

42, LaserCam-HR-UV User Manual 32 Spectral Range 2 / 3 -inch: 190 to 355 nm Camera Type Progressive scanning CMOS Video Format 10-bit digital USB 2.0 hi-speed Sensor Active Area 8.5 mm (H) x 6.8 mm (V) ( 2 / 3 -inch format) Sensor Elements 1280 (H) x 1024 (V) Effective Element Spacing 6.7 µm (H…

32, LaserCam-HR-UV User Manual 22 The LDFP has a fragile coating. Cleaning the LDFP filter glass with anything other than clean air at low pressure may damage the glass. Dust/Dirt If low intensity spots or small circles are noticed in the camera video then dust may be present on the CMOS s…

30, LaserCam-HR-UV User Manual 20 Pixel Spacing The LaserCam-HR-UV camera incorporates a phosphor coating. The granularity of this thin coating results in an effective pixel size of 20.0 x 20.0 µm. In comparison, the CMOS array without the UV coating has a 6.7 x 6.7 µm pixel pitch. Effe…