Janome 6260QC Instruction Manual

32, AAASewing.com 30 18 19 21 1 2 1 2 1 2 18 19 21 1 1 2 3 2 3 Round end/Keyhole buttonhole Machine setting Pattern #18, #19 or #21 LED display Foot R: Automatic buttonhole foot The sewing sequence is the same as sensor buttonhole. Refer to pages 26, 27, 28 for sewing instruction. Starti…

13, AAASewing.com 11 Winding the Bobbin ¥ Removing the bobbin Slide the hook cover release button to the right, and remove the hook cover. Take the bobbin out. Hook cover release button Hook cover Bobbin Setting the spool of thread Place the spool of thread on the spool pin with the thread comin…

34, AAASewing.com 32 9 0 Auto 1 2 3 16 Sensor 1 2 3 1 3 2 3 6 7 4 5 Corded Buttonholes Machine setting Pattern #16 Foot R: Automatic buttonhole foot Thread tension Auto With the buttonhole foot raised, hook the filler cord on the cord spur on the back of the buttonhole foot. Bring the ends towar…

45, Janome 6260QC AAASewing.com 43 Pattern Combination Machine setting Pattern #42 and #54 Foot F: Satin stitch foot Thread tension Auto You can sew a combination of decorative pattern with the aid of the auto lock button. Auto lock button Example: To sew a combination of two units of the pattern #42 …

39, AAASewing.com 37 9 0 Auto 1 2 3 15 1 2 3 5 4 1 1 2 2 3 6 7 4 (1) (2) (1) (2) Blind Hem Stitch Machine setting Pattern #14, #15 Foot G: Blind hem foot Thread tension Auto Fold a hem with the wrong side up forming a 0.4-0.7 cm (3/16-5/16ý) allowance. Wrong side of the fabric 0.4-0.7 cm …

20, AAASewing.com 18 ¥ Adjusting the Stitch Length The LED display shows Ò 2.2 Ó (default setting) when the plus or minus key is pressed once. Press the plus (+) key to increase stitch length. Press the minus (Ð) key to decrease stitch length. The stitch length can be varied from 0.0 to 5.0. NOTE:…