Standard Horizon PS1000 Owner's Manual

44, Phantom PS1000Page 44 Position Request DSC signal. 5. After a DSC position request is transmitted, the trans- ceiver remains on channel 70 until position data is received from the polled vessel. 6. When the Phantom PS1000 receives the position from the polled vessel, RECEIVED POS REPLY” wil…

48, Phantom PS1000Page 48 12 RADIO SETUP 12.1 LCD DIMMER This selection sets up the display backlight intensity or to turn it off. Default setting is level “3.” 1. Press and hold down the [ CALL ( SET ) MENU ] key until “RADIO SETUP” menu appears. 2. Press the [ CALL ( SET ) MENU …

13, Page 13Phantom PS1000 8.5 CONNECTION OF GPS WITH NMEA OUTPUT • The GPS must have the NMEA Output turned on and set to 4800 Baud in the setup menu. If there is a selection for parity select none. • For further information on interfacing /setting up your GPS. Please contact th…

31, Page 31Phantom PS1000 11.2 DSC SCAN When the radio is shipped from the factory it is programmed so CH70 (the DSC channel) is scanned at all times. There is a selection in the SETUP MENU to disable the DSC SCAN. However, turning off DSC SCAN will disable the radio from receiving DSC c…

26, Standard Horizon PS1000 Phantom PS1000Page 26 10.9 MAKING TELEPHONE CALLS To make a radiotelephone call, use a channel designated for this purpose, The fastest way to learn which channels are used for radiotelephone traffic is to ask at a local marina. Channels available for such traffic are designated Public Correspo…

27, Page 27Phantom PS1000 10.12 SCANNING Allows the user to select the scan type from Memory scan or Priority scan. “Memory scan” scans the channels that were programmed into memory. “Pri- ority scan” scans the channels programmed in memory with the priority chan- nel. 10.12.1 S…