Manual, Quick Reference for Standard Horizon GX2360S Marine Radio, Transceiver (1 pages)
Data: UPD 27th November 2023
Standard Horizon GX2360S Marine Radio, Transceiver PDF Quick Reference (Updated: Monday 27th of November 2023 08:43:07 PM)
Rating: 4.4 (rated by 81 users)
Compatible devices: ECLIPSE GX1300E, HX400, HX255S, HX270S, Horizon Eclipse+ GX1250S, HX260S, Explorer GX1600, Hx750s.
Recommended Documentation:
Text Version of Standard Horizon GX2360S Marine Radio, Transceiver Manual (Summary of Contents)
(Ocr-Read of Document's Main Page, UPD: 27 November 2023)
QUICK REFERENCE
1
)
DSC DISTRESS (MMSI must be programmed)
a. LIFT DISTRESS COVER
b. PRESS ROUND DISTRESS KEY
c. PRESS AND HOLD DISTRESS KEY UNTIL ALARM SOUNDS.
2
)
VOLUME/POWER
a. Press and hold to turn power on or off.
b. Turn to adjust speaker volume when SQL off.
3
)
SQUELCH
Adjust to the point where random noise stops from the speaker.
Further adjustment will cause a loss in reception of wanted signals.
4
)
ROTARY CHANNEL KNOB
a. Used to select channels.
b. When in PA mode adjusts PA volume.
5
)
Channel 16/9
Press once to select CH16. For CH9 press and hold.
6
)
WX “NOAA WEATHER”
Press
[
WX
]
key to select NOAA weather channels.
For weather alert, select channel into scan memory.
7
)
A/B
a. To program press and hold
[
A/B
]
key and turn rotary knob to desired channel,
release
[
A/B
]
key. Repeat this procedure for other channel.
b. After step a. is performed, the
[
A/B
]
key will select the two programmed channels
and the last selected channel.
8
)
DW
(
IC
)
a. Select a channel to be dual watched to CH16 and press the
[
DW
]
key.
b. When connected to optional RAM mic, press and hold to select the intercom
function between Radio and the RAM mic.
9
)
H/L
(
NAV
)
a. Switches transmitter power from 1 to 25 watt output.
b. When connected to GPS, press and hold to show the NAV GPS Data, Time,
vessel’s SOG (Speed Over Ground), and COG (Course Over Ground).
10
)
SCAN
a. Starts and stops scanning on the programmed channels.
b. To show channels in scan memory hold
[
SCAN
]
key and turn rotary knob.
11
)
MEM
a. Add/remove channels into/from memory for scanning, select channel with rotary
knob, then press the
[
MEM
]
key. “MEM” will appear on LCD. Press the
[
MEM
]
key again to remove the channel from memory. “MEM” will disappear from LCD.
b. Press and hold to lock out the front panel keys and rotary knob.
Press and hold again to unlock the front panel keys and rotary knob.
12
)
PA/FOG
a. First press selects PA. Volume is adjusted with rotary knob.
Listen back volume is adjusted with VOL control.
b. Second press selects menu for FOG1 thru FOG4, HORN, SIREN, AGROUND,
and ANCHOR.
13
)
CALL/SET
(
MENU
)
a. Press to select DSC call functions. Individual Directory and All Ships Call.
b. Press and hold to select Radio Setup Menu or DSC Setup Menu.
14
)
CLEAR VOICE NOISE CANCELING MIC
Speak 1 inch away from the hole in the top front of mic.
QU ANTUM
Recommended:
TAB 2 A10-30, TelePresence SpeakerTrack 60, SUNNY BOY 3000TL, SEK-1000
TAYLOR III, IC-X21AT, VXR-7000, Intrepid LE GX1265S, PXIe-5646R, Stratix IV GX
-
VX-2500U Alignment, Page 1/4Vertex Standard Co., Ltd.VX-2500U AlignmentThe VX-2500U has been carefully aligned at the factory for the specified performance across thefrequency range specified for each version.Realignment should therefore not be necessary except in the event of a compon ...
Model & Doc Type: VX-2500U 4
-
VXR-7000UK66VXR-7000U_Alignment.doc1VXR-7000U AlignmentThe VXR-7000 is carefully aligned at the factory for the specified performance across the entireoperating frequency range. Realignment should therefore not be necessary except in the event of acomponent failure. All component replacemen ...
Model & Doc Type: VXR-7000 4
-
AR-3300 & AR-3500 Alignment Procedures SYNTHESIZER 1. - Set radio to 29.9000 Mhz. FM mode. 2. - Connect DVM to TP-1 and adjust T-13 for 3.8 VDC. 3. - Set the radio to 28.0000 Mhz. ( Clarifier Center ) 4. - Connect Scope to TP-2. Adjust T-12 for Max in AM mode. 5. - Connect Scope to catho ...
Model & Doc Type: AR-3300 9
-
Yaesu FL-110 modification for 5W drive7-sep-2017 Schematic redrawn.YAESU FL-110REDRAWN FL-110 SCHEMATICOver the years, FL-110 schematics have become a rarity and what's on the Internet are mostly vage images. That's why they were collected and after a few nights of hardwork ...
Model & Doc Type: FL-110 2
Operating Impressions, Questions and Answers:
