Seiko CT-2000 Operating Manual

17, - 13 - 3.4.2 Memory Block z The measurement data obtained from the start of the timer until it is stopped and reset is stored in memory as one block of data. z The block No. is assigned to each block automatically, and the data can be recalled and reprinted by designating th…

28, Seiko CT-2000 - 24 - 5.2 Parallel Counting Mode (Measurement Mode No. 2) 5.2.1 Features z This measurement mode is suitable for such sports events as track races, marathon, swimming, cycle road races, speed skating, and boat and canoe races. z Split time can be measured lane by lane (or r…

26, - 22 - 5. MEASUREMENT MODE 5.1 Counting Mode (Measurement Mode No. 1) 5.1.1 Features z This measurement mode is suitable for such sports events as track races, marathon, cycle road races, and Nordic ski races. z Order of arrival and split time are printed out each time a measurement is made fr…

22, - 18 - 4.2 Dry Battery Setting ① The dry battery setting display is shown. After the time/calendar is registered, the display changes over to the dry battery setting display automatically. ② Set the type of dry batteries to be used. The battery type can be sel…

31, - 27 - ④ Reset the timer. Press @@@ while keeping @@@@ pressed to stop the timer. When the timer is reset, the display returns to the one shown in Step ①above, and the block No. is incremented by one. 5.3.3 Example Printout …

45, - 41 - 6. OTHER FUNCTIONS 6.1 Start Time Setting z Start time other than “0” second can be set. z This function is available in the following measurement modes: ・ Counting Mode (Measurement Mode No. 1) ・ Parallel Counting Mode (Measurement Mode No. 2) ・ Parallel Lap/Split Tim…