Pitney Bowes Relay 5000 Operator's Manual

93, Pitney Bowes Relay 5000 SV63136 Rev. A 4-3 Advanced Operation • 4 This chapter explains use of the alphanumeric matrix and system use that exceeds the System Operator level of access. Functions explained in the chapter are: • Using the Alphanumeric Matrix • Saving a Job • Deleting a Job �…

137, SV63136 Rev. A 7-5 Add-On Modules • 7 Loading the HCSF (continued) Figure 7.4: HCSF Ready to Feed 4. Load the remaining paper up to the fill line. 5. Repeat steps 2-5 for each remaining HCSF Tray. 6. Press the button on the front of the HCSF for each of the Trays. The loaded Tray(s) wil…

76, 3-32 SV63136 Rev. A 3 • Basic Operation Envelope Options (continued) Menu Item Associated Options and Actions Additional Settings Double Detect allows the system sense when multiple envelopes are fed unintentionally. Note: This menu option is not available when the job re- quires a custo…

173, SV63136 Rev. A 8-27 Scanning • 8 8. Use the blue thumbwheel to move the scan head. Move the thumbwheel until the pointer lines up with the measurement (distance from the center of the page to the center of the mark) defined earlier. Blue thumbwheel Figure 8.1: Use the Blue Thumbwheel to …

104, 5-8 SV63136 Rev. A 5 • Troubleshooting Table 5-1 Startup Problems Problem Cause Action System won’t power up. System power cord is not plugged into the wall outlet. Plug power cord into wall outlet. No power at outlet. Check outlet. Verify that wall outlet has power. Fa…