Adaptec 2010S - SCSI RAID Storage Controller Software User's Manual

82, 3-41 Storage Manager Drive Failures Drive failures are indicated by flags, which differ depending on whether they refer to an array or a drive in an array. Failure conditions are indicated as follows: Device Type Array Type Flag in Physical Configuration Flag in Logical Configura…

16, 2-3 Storage Manager on ROM The array groups are accessible during the build process, with data protected; however RAID performance is at a reduced level until the build is complete. If you have exited SMOR and you want to monitor the progress of the build operation, you can view the Arr…

90, Adaptec 2010S - SCSI RAID Storage Controller 3-49 Storage Manager Environments with a large number of sequential reads should generate a high number of Read-Ahead Hits relative to Total Sectors. These hits reduce the number of seek operations and increase performance. The Read-Ahead Hits count can be increased by adding more cache …

1, STORAGE MANAGEMENT SOFTWARE USER’S GUIDE A DAPTEC SCSI RAID 2010S/ 2015S Combined RAID SW-UG.book Page 1 Monday, September 9, 2002 1:25 PM …

68, 3-27 Storage Manager The current controller model, firmware version, and firmware type are displayed. To specify an image file for the flash operation, you can type a path and filename in the Filename field or click Browse to use a file selection window. Firmware images are contained…

114, A-3 SNMP Management Console The SNMP management console is usually a client workstation running SNMP-based management software. The console software can be from any vendor who provides SNMP management console software. Adaptec MIB Information The specific hardware and configuration information i…