Adaptec AUA-2000 Operation & User’s Manual

13, Adaptec AUA-2000 4 Installing the USB2Connect Adapter Installing the USB2Connect Adapter 1 Discharge any static electricity from your body by touching a grounded metal object (such as the exposed metal parts on the back of your computer). 2 Turn off power to the computer and disconnect the power …

36, R Adaptec, Inc. 691 South Milpitas Boulevard Milpitas, CA 95035 USA © 2002 Adaptec, Inc. All rights reserved. Adaptec and the Adaptec logo are trademarks of Adaptec, Inc. which may be registered in some jurisdictions. Part Number: 513289-06, Ver. AA LB 07 /02 …

11, 2 Overview The AUA-4000A and AUA-5100 adapters are shown below. System Requirements In order to use the USB2connect adapter, you need ■ One of the following types of computers: ■ Windows 2000, Windows Me, or Windows 98 SE computer with a 200-MHz (or faster) processor ■ Power Macin…

35, 26 Troubleshooting Hubs The following figure shows the recommended configuration for connecting USB 1.1 and USB 2.0 devices. Note that you could connect USB 2.0 devices to a USB 1.1 hub, but the USB 2.0 devices would run at slower USB 1.1 speeds. Troubleshooting If you encounter diffic…

18, 9 Installing the Windows Drivers 10 To verify that the driver is installed, right-click the My Computer desktop icon, select Properties, click the Hardware tab, then click the Device Manager button. Expand Universal Serial Bus controllers and verify that the information shown below …

21, 12 Installing the Windows Drivers Note: What your computer shows may differ from what is shown in the example above. First the file may not be exactly the same, but it will have an inf extension. Also, the drive letter for your CD-ROM drive may not be e. 7 When Windows is finished copying dri…