Engl Z-11 Operator's Manual

2, The MIDI Switcher Z-11 was designed for accessing specific switchable functions of amps (e.g. "Ritchie Blackmore Signature", "Thunder 50", "Screamer", 19" rack units E530 or E840) via MIDI that are switched via conventional 1/4" jack/plug-compa…

3, MIDI Data Switch settings code switches: reception via 1 2 3 4 OMNI-Mode up x x x P…

4, Engl Z-11 9 10 12 14 13 15 16 11 9 MIDI THRU Standard 5-pin diode jack. It sends incoming MIDI data from the MIDI IN jack to another connected MIDI device. 10 MIDI IN Standard 5-pin diode jack. It receives MIDI data from your MIDI footswitch. This jack also supplies the current for the ENGL MIDI…

5, Setup and Installation: There are a number of setup and installation options: 1. Place it on a flat surface: Attach the four adhesive rubber pads to bottom of the device. 2. Attach it to your ENGL device using the velcro strips ( e.g. to the SAVAGE 120’s rear panel or inside …

6, Technical Data: Power supply: External power pack 7-15 volts AC or 9-20 volts DC, approx. 300 mA; Maximum power consumption by the Switcher: approx. 140 mA. Power supply via the MIDI cable Pin 1 and Pin 2 (center) can be activated fo…