Adaptec RS Series Operation & User’s Manual

85, 85 E. Using Novell NetWare After having explained in chapters B and C the installation of the ICP Controller and the Host Drives, we would now like to give you some hints and pieces of advice on how to in- stall Novell's operating system Novell NetWare. We shall mainly focus on NetW…

144, 144 J.4.5 Menu Advanced Setup: Configure Logical Drives Logical Drives (hierarchy level 2) are installed in this main menu option. Selecting Configure Logical Drives leads you to the screen shown next. The F4 key gives you a list of all the hard disks this Logical Drive consists of. If it is a …

47, 47 SE/LVD Terminator for 68 pin SE or LVDS cables. SE/LVD Terminator for SE/LVD hard disks with SCA connector. …

162, 162 Turn off the Audible Alarm This option allows you to turn off the audible alarm of the ICP Controller manually. After a significant event (a drive failure or an overheat of the ICP Controller) the audible alarm of the ICP Controller is turned on. If the reason of the event is rem…

108, 108 is displayed, do not press ENTER immediately, but type in link ENTER. The system will then prompt you for the name of the BTLD driver. Now type in gdth. It may be necessary to type in the complete boot string. In this case, you have to add the following command: link=gdth btl…

97, Adaptec RS Series 97 To do so, follow these instructions: 1. Load the Registry Editor regedt32.exe in \...\system32 2. Select the window HKEY_LOCAL_MACHINE on Local Machine 3. Choose the Key gdtx in the directory SYSTEM\CurrentControlSet\Services\ . 4. Enter by means of Edit, function Add Key, the name …