Acces PCI-DIO-24D Operation & User’s Manual

26, Manual PCI-DIO-24DH 26 Chapter 8: Connector Pin Assignments The H card has a 50-pin connector provided on the back plate of these cards for I/O connections. The mating connector is an AMP type 1-746285-0 or equivalent. Connector pin assignments are listed below. Assignment Pin Ass…

25, Manual PCI-DIO-24DH 25 Pulse Width The Pulse Width function will measure the width of an applied event from its rise to its fall (effectively one half the period). The Base Address of the card is required as input to the function. The signal should be applied to the CLOCK I…

15, Manual PCI-DIO-24DH 15 Chapter 6: Programming These cards are I/O-mapped devices that are easily configured from any language and any language can easily perform digital I/O through the card's ports. This is especially true if the form of the data is byte or word wide. …

6, Acces PCI-DIO-24D Manual PCI-DIO-24DH 6 I/O wiring connections for the H card are via a 50-pin connector on the back plate of the card. Flat insulation-displacement ribbon cables can be used to connect these cards to termination panels and relay output cards. Also, the 50-pin connection provide…

3, Manual PCI-DIO-24DH 3 Warranty Prior to shipment, ACCES equipment is thoroughly inspected and tested to applicable specifications. However, should equipment failure occur, ACCES assures its customers that prompt service and support will be available. All equipment originally manufact…