Neopost DS-140 Operator's Manual

43, 43 140 Operator Manual Select ‘Open Archive’ on the Statistics Diagnostics screen to display the details of archives, selected by date. Archives are automatically created for each session and are saved on the computer until the end of the current month. At the end of the month, all session a…

16, 16 140 Operator Manual Hopper Fine Tuning From here you can adjust hopper settings. Click on the inserter hopper, then Document Fine Tuning to display further information. You can select: a: Whether or not the envelope is sealed. Select ‘Off’ if, for example, later h…

48, 48 140 Operator Manual 8.4 Using the accumulator If the machine is tted with an accumulator, this can be used for grouping forms prior to folding, or for OMR/Barcode grouping for subsequent removal by hand. It can also be used to hold diverted forms for subsequent hand remo…

2, 2 140 Operator Manual 5.12.4 Data Logs ..................................................................42 5.12.5 Open Archive .............................................................43 6. Running The Job ....................................................................... 44 7. Daily …

15, Neopost DS-140 15 140 Operator Manual 5.3.3 To adjust the Envelope Inserter settings Unit Fine Tuning Click on the envelope inserter on the machine graphic to display the ne tuning screen. Click on Hardware Fine Tuning to display further information. You can select: a: The width of the collate…

5, 5 140 Operator Manual Caution! Please, read these notes with care. Save these instructions for later use. All notes and warnings found on the machine are to be followed. Important! The machine must be installed only by an Authorised Service Engineer. A safe, lev…