Pella 80WW0101 Replacement Instructions Manual

3, 3 WINDOW PREPARATION A. Casement: On the room side of the window drill 1/8" diameter clearance holes through the head, jambs and sill of the frame. Space the holes a maximum of 6" from each end and a maximum of 16" on center. Note: On vent casements, place the holes…

7, Because all construction must anticipate some water inltration, it is important that the wall system be designed and constructed to properly manage moisture. Pella Corporation is not responsible for claims or damages caused by anticipated and unanticipated water inltration; decien…

8, LOCK LEVER REMOVAL AND INSERTION Note: You may want to remove the lock lever prior to finishing the window, or if it needs to be replaced with a lock lever in a different finish. Interior B Exterior C Interior F Exterior E D A. Unlock and open the window. B. Place the lock le…

2, Pella 80WW0101 1 REMOVE THE EXISTING SASH Note: Remove the new window from its packaging. Inspect and measure the new window to confirm it will fit into the opening prior to removing the existing window. A. Remove the existing sash. This will vary per manufacturer of the existing window. Remov…

1, Part Number: 80WW0101© 2012 Pella Corporation These instructions were tested and developed for replacing windows in wood-frame wall construction systems designed to manage moisture. Installation recommendations for other types of wall construction, wall systems or conditions, may be ob…